D-Link DGS-3627G Product Manual - Page 303

BGP Clear xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch This window is used to reset the Border Gateway Protocol (BGP) connections using hard or soft reconfigurations. To view this window, click L3 Features > BGP > BGP Clear, as shown below: Figure 4- 146. BGP Clear window To configure BGP clear on the Switch, complete the following fields: Parameter Description Type Choose among IP Address, AS, Peer Group, External, or All. IP Address - Specify to reset the session with the specified neighbor. AS - Specify to reset sessions with BGP peers in the specified Autonomous System. Peer Group - Specify to reset a peer group. External - Specify all eBGP sessions will be reset. All - Specify that all current BGP sessions will be reset. IP Address If IP Address is specified in the Type above, enter an IP address. AS Number (165535) If AS is specified in the Type above, enter an Autonomous System number. Peer Group Name If Peer Group is specified in the Type above, enter a peer group name. Mode Option Tick the desired mode option: Soft, In, Prefix Filter, or Out. Soft - This initiates a soft reset. It does not tear down the session. In - This iInitiates inbound reconfiguration. If neither in nor out keywords are specified, both inbound and outbound sessions are reset. Prefix Filter - The local site configured prefix filter will be notified to the remote neighbor when inbound soft reset is applied. Out - This initiates outbound reconfiguration. Click Apply to implement changes made. 287