D-Link DGS-3627G Product Manual - Page 169
Extension LLDP Port Settings, L2 Features, 3 Extension, LLDP Port Settings, Apply
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch 802.3 Extension LLDP Port Settings The following window is used to set up 802.3 Extension LLDP on individual port(s) on the Switch. To view this window, click L2 Features > LLDP > 802.3 Extension LLDP Port Settings, as shown below: Figure 3- 68. 802.3 Extension LLDP Port Settings Table window The following parameters can be set or displayed: Parameter Description Unit Select the desired stacking unit, if applicable. From/To Select a port or group of ports using the pull-down menus. MAC/PHY Use the drop-down menu to toggle the MAC/PHY Configuration/Status between Enabled and Configuration/Status Disabled. Power Via MDI This TLV optional data type indicates that LLDP agent should transmit 'Power via MDI TLV'. Three IEEE 802.3 PMD implementations (10BASE-T, 100BASE-TX, and 1000BASE-T) allow power to be supplied over the link for connected non-powered systems. The Power Via MDI TLV allows network management to advertise and discover the MDI power support capabilities of the sending IEEE 802.3 LAN station. The default state is Disabled. Link Aggregation Use the drop-down menu to toggle Link Aggregation between Enabled and Disabled. Maximum Frame Size Use the drop-down menu to toggle Maximum Frame Size between Enabled and Disabled. Click Apply to implement changes made. 153