D-Link DGS-3627G Product Manual - Page 206

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 4- 25. Policy Routing - Add window Adjust the following parameters and click Apply to set the new Policy Route, which will be displayed in the Policy Routing Settings window. Click Show All Policy Route Entries to return to the Policy Routing Settings window. Parameter Description Name Enter a name of no more than 32 alphanumeric characters that will be used to identify this policy route. Profile ID Enter the Profile ID number of the Access Profile, previously created, which will be used to identify packets as following this Policy Route. This access profile, along with the access rule, must first be constructed before this policy route can be created. Access ID Enter the Access ID number of the Access Rule, previously created, which will be used to identify packets as following this Policy Route. This access rule, along with the access profile, must first be constructed before this policy route can be created. Nexthop This is the IP address of the Next Hop router that will have a direct connection to the Gateway router connected to the Internet. State Use the pull-down menu to enable or disable this Policy Route. 190