D-Link DGS-3627G Product Manual - Page 371

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch the port on the Switch. Ports (e.g: 1, 5, 712) Specify the switch ports or tick the All Ports check box to select all ports. Clear Type Use the pull-down menu to select the IPv4, IPv6 or All type. To view particular port settings, choose the unit - port number and click Find. To view all entries on the window, click View All. To delete an entry, enter the port number, choose the Clear Type, and click Clear. MAC Block List This window is used to view unauthorized devices that have been blocked by IP-MAC-Port binding restrictions. To view this window click, Security > IP-MAC-Port Binding > MAC Block List, as shown below: Figure 7- 13. MAC Block List window To find an unauthorized device MAC address that has been blocked by the IP-MAC port binding restrictions, enter the VLAN Name and MAC Address in the appropriate fields and click Find. To delete an entry, click the Delete button next to the entry's port. To delete all the entries in this window, click Delete All. ND Snoop Entries This table is used to view ND snooping entries on specific ports. To view this window click, Security > IP-MAC-Port Binding > NP Snoop Entries, as shown below: Figure 7- 14. NP Snoop Entries window The following fields can be set: Parameter Description Unit - Port Use the pull-down menu to choose the Switch ID number of the Switch in the switch stack and the port on the Switch. Ports (e.g: 1, 5, 712) Specify the switch ports or tick the All Ports check box to select all ports. To view particular port settings, choose the unit - port number from the pull-down menu and click Find. To view all entries on the window, click View All. To delete an entry, enter the port number, and click Clear. 355