D-Link DGS-3627G Product Manual - Page 389

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 7- 35. WAC Port Settings window The following parameters can be configured: Parameter Description Unit Use the drop-down menu to select the unit to configure. From/To Enter the range of ports to configure. State Enable or disable the WAC port settings on the specified ports. Aging Time (1-1440 min) This parameter specifies the period of time a host will keep in authenticated state after it succeeds to authenticate. Enter a value between 0 and 1440 minutes. The default setting is 1440 minutes. To maintain a constant Port Configuration tick the Infinite box in the WAC configuration window. Idle Time (1-1440 min) This parameter specifies the period of time during which there is no traffic for an authenticated host and the host will be moved back to the unauthenticated state. Enter a value between 1 and 1440 minutes. A value of Infinite indicates the Idle state of the authenticated host on the port will never be checked. The default setting is Infinite. Block Time (0-300 This parameter specifies the period of time a host will keep in a blocked state after it fails sec) to authenticate. Enter a value between 0 and 300 seconds. The default setting is 0 seconds. Click Apply to implement the changes. 373