D-Link DGS-3627G Product Manual - Page 76

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch The following fields can be configured: Parameter Description VLAN Name Enter the name of the VLAN to Add, Find or Delete. VID (1-4094) Enter the VLAN ID of the VLAN to Add, Find or Delete. Mirror Group ID The mirror group identify that specifies which mirror session is used for the RSPAN source function. If the mirror group is not specified when configuring the mirror ports, the mirror group 1 will be the default group. Target Port RX Source Ports TX Source Ports Redirect Port The mirror group target port which the mirror session used for the RSPAN source function. The goal of Rx source ports is to monitor as much as possible all the packets received by the source interface or VLAN before any modification or processing is performed by the switch. A copy of each packet received by the source is sent to the destination port for that RSPAN session. The goal of Tx source ports is to monitor as much as possible all the packets sent by the source interface after all modification and processing is performed by the switch. RSPAN redirect function will work when RSPAN is enabled and at least one RSPAN VLAN has been configured with redirect ports. Modify Redirect Click on the corresponding Modify button to edit the entries. Modify Source Click on the corresponding Modify button to edit the source setting for the RSPAN VLAN on the source switch. To remove an entry, click the corresponding Delete by VLAN icon. To search for an entry enter the appropriate information and click the Find by VLAN button. To modify an existing entry, click the corresponding Modify button, revealing the following window to configure: Figure 2- 64. RSPAN Redirect Settings (Edit) window The following fields can be configured: Parameter Description VLAN Name VID (1-4094) Redirect Port Action Redirect Port This is the VLAN Name that, along with the VLAN ID, identifies the VLAN which will modify the RSPAN Entries. This is the VLAN ID that, along with the VLAN Name, identifies the VLAN which will to modify the RSPAN Entries. Use the drop-down menu to select the configuration Redirect Ports Action. Add - Add Redirect ports. Delete - Delete Redirect ports. RSPAN redirect function will work when RSPAN is enabled and at least one RSPAN VLAN has been configured with redirect ports. Click Apply to implement the changes. To return to the RSPAN Settings window, click the Show All RSPAN Table link. 60