D-Link DGS-3627G Product Manual - Page 178
ERPS RAPS VLAN Settings - Add window, Parameter, Description, ERPS State, West Port
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Clicking the Add button will reveal the following window to configure: Figure 3- 78. ERPS RAPS VLAN Settings - Add window Enter an R-APS VLAN ID in the field provided and click Apply to make a new entry for the ERPS RAPS VLAN Table. To edit an exisiting ERPS RAPS VLAN Table entry, click the Modify button in the Modify column in the ERPS RAPS VLAN Table. The following window will open: Figure 3- 79. ERPS RAPS VLAN Settings - Edit window The following fields can be set: Parameter Description ERPS State This is used to configure ring state of the specified ring. When both the global state and the specified ring ERPS state are enabled, the specified ring will be activated. STP and LBD should be disabled on the ring ports before the specified ring is activated. The ring cannot be enabled before the R-APS VLAN is created, and ring ports, RPL port, RPL owner, are configured. Note that these parameters cannot be changed when the ring is activated. The default ring state is Disabled. West Click to specify the port as the west ring port. To specify as a Virtual Channel, tick the check and toggle from Port to Virtual Channel. West Port If Port is set above, enter the port to be configured. 162