D-Link DGS-3627G Product Manual - Page 311

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch IP Standard Access List Settings This window is used to create an access list used to filter routes. To view this window, click L3 Features > IP Route Filter > IP Standard Access List Settings, as shown below: Figure 4- 153. IP Standard Access List Settings window The IP standard access list parameters are described below: Parameter Description Access List Name Enter the name of the access list. Click Apply to implement changes made. To remove an entry from the table, click its corresponding under the Delete heading. Route Map Settings This window is used to create a route map or add/delete sequences to a route map. To view this window, click L3 Features > IP Route Filter > Route Map Settings, as shown below: Figure 4- 154. Route Map Settings window The route map parameters are described below: Parameter Description Route Map List Name Enter the route map name. Click Apply to implement changes made. To remove an entry from the table, click its corresponding under the Delete heading. 295