D-Link DGS-3627G Product Manual - Page 370

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch IMPB Entry Settings The table on this window, which is also known as the "IMPB white list," is used to create Static IP-MAC-Port Binding entries on the Switch. To view this window click, Security > IP-MAC-Port Binding > IMPB Entry Settings, as shown below: Figure 7- 11. IMPB Entry Settings window The following fields can be set or modified: Parameter Description IPv4 Address Enter the IPv4 address to bind to the MAC address set below. IPv6 Address Enter the IPv6 address to bind to the MAC address set below. MAC Address Enter the MAC address to bind to the IP Address set above. Ports Specify the switch ports for which to configure this IP-MAC-port binding entry (IP Address + MAC Address). Tick the All Ports check box to configure this entry for all ports on the Switch. Click Add for implement changes, click Find to search for an entry, click View All for the table to display all entries and click Delete to remove an entry. DHCP Snoop Entries This table is used to view dynamic entries on specific ports. To view particular port settings, select the unit, enter the port number and click Find. To view all entries click View All, and to delete an entry, click Clear. To view this window click, Security > IP-MAC-Port Binding > DHCP Snoop Entries, as shown below: Figure 7- 12. DHCP Snoop Entries window The following fields can be set: Parameter Description Unit - Port Use the pull-down menu to choose the Switch ID number of the Switch in the switch stack and 354