D-Link DGS-3627G Product Manual - Page 482

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Current Configuration Settings The Current Configuration Settings window allows users to manipulate configuration images saved in the Flash memory of the Switch. To view this window, click Save Services > Current Configuration Settings, as shown below: Figure 9- 5. Current Configuration Settings window This window offers the following information: Parameter Description Configuration File Enter the configuration file located on the Flash drive to be altered. Action This field has two options for configuration. Boot - Select this option to set the configuration file specified above as the boot up configuration for the Switch. This saved configuration will be set as the boot up file after a switch reboot has been performed. The default setting has configuration file C:/STARTUP.CFG as the boot up configuration file for the Switch unless specified here. Active - Choosing this parameter will first load and then activate this configuration file on the Switch. Click Apply to implement changes made. Logout Use the Logout page to logout of the Switch's Web-based management agent by clicking on the Logout button. Figure 9- 6. Logout window 466