D-Link DGS-3627G Product Manual - Page 417

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch To configure the SSH server on the Switch, modify the following parameters and click Apply: Parameter Description SSH Server Status Use the pull-down menu to enable or disable SSH on the Switch. The default is Disabled. Max Session (1-8) Enter a value between 1 and 8 to set the number of users that may simultaneously access the Switch. The default setting is 8. Connection Allows the user to set the connection timeout. The use may set a time between 120 and 600 Timeout (120-600) seconds. The default setting is 120 seconds. Auth. Fail (2-20) Allows the Administrator to set the maximum number of attempts that a user may try to log on to the SSH Server utilizing the SSH authentication. After the maximum number of attempts has been exceeded, the Switch will be disconnected and the user must reconnect to the Switch to attempt another login. The number of maximum attempts may be set between 2 and 20. The default setting is 2. Session Rekeying Using the pull-down menu uses this field to set the time period that the Switch will change the security shell encryptions. The available options are Never, 10 min, 30 min, and 60 min. The default setting is Never. Listened Port Number (1-65535) This displays the virtual port number to be used with this feature. The common port number for SSH is 22. 401