D-Link DGS-3627G Product Manual - Page 296

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch BGP Neighbor General & Timer Settings This window is used to configure the BGP neighbor's general and timer settings. To view this window, click L3 Features > BGP > BGP Neighbor General & Timer Settings, as shown below: Figure 4- 139. BGP Neighbor General Settings window To configure BGP neighbor general settings on the Switch, complete the following fields: Parameter Description BGP Neighbor General Settings IP Address Enter the IP address of the neighbor to be configured. Peer Group Name Enter the peer group to be configured. Send Community Toggle between Standard and None. This specifies the communities attribute to be sent to the BGP neighbor. Standard means only standard communities will be sent and None means no communities will be sent. The default value is None. Next Hop Self Enable or disable the next hop self attribute. By default, this setting is Disabled Soft Reconfiguration Enable or disable the inbound soft reconfiguration function. By default, this setting is Inbound Disabled. Remove Private AS If this setting is set to Enabled, the private AS number in the AS path attribute of the BGP update packets will be dropped. By default, the setting is Disabled. Allowas In If this is Enabled, the BGP router's self AS is allowed in the AS path list. By default, this 280