D-Link DGS-3627G Product Manual - Page 504

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Appendix F RADIUS Attributes Assignment The RADIUS Attributes Assignment on the Switch is used in the following modules: 802.1X (Port-based and MAC-based), Webbased Access Control (WAC), Japanese Web-based Access Control (JWAC), and MAC-based Access Control. The description that follows explains the following RADIUS Attributes Assignment types: ƒ Ingress/Egress Bandwidth ƒ 802.1p Default Priority ƒ VLAN To assign Ingress/Egress bandwidth by RADIUS Server, the proper parameters should be configured on the RADIUS Server. The tables below show the parameters for bandwidth. The parameters of the Vendor-Specific attributes are: Vendor-Specific Attribute Vendor-ID Vendor-Type Description Defines the vendor. Defines the attribute. Value 171 (DLINK) 2 (for ingress bandwidth) 3 (for egress bandwidth) Usage Required Required Attribute-Specific Field Used to assign the bandwidth of a port. Unit (Kbits) Required If the user has configured the bandwidth attribute of the RADIUS server (for example, ingress bandwidth 1000Kbps) and the 802.1X authentication is successful, the device will assign the bandwidth (according to the RADIUS server) to the port. However, if the user does not configure the bandwidth attribute and authenticates successfully, the device will not assign any bandwidth to the port. If the bandwidth attribute is configured on the RADIUS server with a value of "0" or more, than the effective bandwidth (100Mbps on an Ethernet port or 1Gbps on a Gigabit port) of the port will be set to no_limited. 488