D-Link DGS-3627G Product Manual - Page 317
Per Queue Bandwidth Control Settings, Per Queue Bandwidth Control Settings window
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 317 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Per Queue Bandwidth Control Settings This window is used to sets the bandwidth control for each specific queue on specified ports. To view the Per Queue Bandwidth Control Settings window, click QoS > Bandwidth Control > Per Queue Bandwidth Control Settings, as shown below: Figure 5- 5. Per Queue Bandwidth Control Settings window The following parameters can be set or are displayed: Parameter Description Unit Select the unit to configure. From/To A consecutive group of ports may be configured starting with the selected port. Queue Use the drop-down menu to select the desired priority queue. Please note Queue 7 is reserved for stacking. Min Rate (64- This field allows the user to enter a minimum guaranteed bandwidth. Ticking the no limit 10000000) check box means there will be no limit on the rate of packets received. Max Rate (6410000000) This field allows the user to limit the bandwidth. When specified, packets transmitted from the queue will not exceed the specified limit even if extra bandwidth is available.Ticking the no limit check box means there will be no limit on the rate of packets received. 301