D-Link DGS-3627G Product Manual - Page 214
RIPng Interface Settings, RIPng Interface Settings window, Parameter, Description
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch RIPng Interface Settings This window allows users to configure RIPng interface settings. To view this window, click L3 Features > RIP > RIPng > RIPng Interface Settings, as shown below: Figure 4- 34. RIPng Interface Settings window Click the hyperlinked name of the interface to configure the settings for RIPng, which will give access to the following window: Figure 4- 35. RIPng Interface Settings (Edit) window The following settings can be configured: Parameter Description Interface Name The name of the interface for the RIPng configuration. State Enable or disable the RIPng state on the specific IP interface. If the state is Disabled, then RIPng packets will not be transmitted or received by the interface. The default setting is Disabled. Metric Enter the cost value of an interface. The RIPng route that was learned from the interface will add this value as a new route metric. The default value is 1. Click Apply to implement changes made. 198