D-Link DGS-3627G Product Manual - Page 202

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 4- 17. Route Preference Settings window The following fields can be set: Parameter Description RIP (1-999) Enter a value between 1 and 999 to set the route preference for RIP. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 100. Static (1-999) Enter a value between 1 and 999 to set the route preference for Static. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 60. Default (1-999) Enter a value between 1 and 999 to set the route preference for Default. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 1. OSPF Intra (1-999) Enter a value between 1 and 999 to set the route preference for OSPF Intra. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 80. OSPF Inter (1-999) Enter a value between 1 and 999 to set the route preference for OSPF Inter. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 90. OSPF ExtT1 (1-999) Enter a value between 1 and 999 to set the route preference for OSPF ExtT1. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 110. OSPF ExtT2 (1-999) Enter a value between 1 and 999 to set the route preference for OSPF ExtT2. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 115. EBGP (1-999) Enter a value between 1 and 999 to set the route preference for EBGP. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 70. IBGP (1-999) Enter a value between 1 and 999 to set the route preference for IBGP. The lower the value, the higher the chance the specified protocol will be chosen as the best path for routing packets. The default value is 130. Click Apply to implement changes made. 186