D-Link DGS-3627G Product Manual - Page 367

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 7- 9. IMPB Global Settings window The following parameters can be set: Parameter Description Trap / Log This field will enable and disable the sending of trap log messages for IP-MAC binding. When Enabled, the Switch will send a trap log message to the SNMP agent and the Switch log when address binding module detects illegal IP and MAC addresses. DHCP Snoop (IPv4) Use the pull-down menu to enable or disable the DHCP snooping state (IPv4) for IP-MACport binding. DHCP Snoop (IPv6) Use the pull-down menu to enable or disable the DHCP snooping state (IPv6) for IP-MACport binding. ND Snoop Use the pull-down menu to enable or disable the ND snooping state for IP-MAC-port binding. Click Apply to implement the settings made. IMPB Port Settings This window is used to configure IMP settings on a port basis. Select a port or a range of ports with the From Port and To Port fields. Enable or disable the port with Strict or Loose State, enable or disable Allow Zero IP and Forward DHCP Packet fields, and configure the port's Max IMPB entry. To view this window click, Security > IP-MAC-Port Binding > IMPB Port Settings, as shown below: 351