D-Link DGS-3627G Product Manual - Page 348

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Offset This field will instruct the Switch to mask the packet header beginning with the offset value specified: value (0-15) - Enter a value in hex form to mask the packet from the beginning of the packet to the 15th byte. value (16-31) - Enter a value in hex form to mask the packet from byte 16 to byte 31. value (32-47) - Enter a value in hex form to mask the packet from byte 32 to byte 47. value (48-63) - Enter a value in hex form to mask the packet from byte 48 to byte 63. value (64-79) - Enter a value in hex form to mask the packet from byte 64 to byte 79. Click Apply to implement changes made. The window shown below is the IPv6 configuration window. Figure 6- 29. CPU Interface Filtering Configuration window (IPv6) The following fields are used to configure the Packet Content Mask: Parameter Description Profile ID This is the identifier number for this profile set. Up to five profile ID configurations can be created. Type Selected profile based on Ethernet (MAC Address), IP address, Packet Content Mask or IPv6. Ethernet instructs the Switch to examine the layer 2 part of each packet header. IP instructs the Switch to examine the IP address in each frame's header. Packet Content Mask instructs the Switch to examine the packet header. IPv6 instructs the Switch to examine the IPv6 part of each packet header. Class Tick this check box to instruct the Switch to examine the class field of the IPv6 header. This class field is a part of the packet header that is similar to the Type of Service (ToS) or Precedence bits field of IPv4. Flow Label Configuring this field, in hex form, will instruct the Switch to examine the flow label field of the IPv6 header. This flow label field is used by a source to label sequences of packets such as non-default quality of service or real time service packets. Source IPv6 Address The user may specify an IP address mask for the source IPv6 address by entering the IP address mask, in hex form. Destination IPv6 The user may specify an IP address mask for the destination IPv6 address by and entering 332