D-Link DGS-3627G Product Manual - Page 426
JWAC Port Settings, Error Timeout 5-300, Quarantine Server, Update Server Settings, Update Server IP
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 426 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Error Timeout (5-300 sec) This parameter is used to set the Quarantine Server Error Timeout. When the Quarantine Server Monitor is enabled, the JWAC Switch will periodically check if the Quarantine works okay. If the Switch does not receive any response from the Quarantine Server during the configured Error Timeout, the Switch then regards it as not working properly. Enter a value between 5 and 300 seconds. Quarantine Server URL This parameter specifies the JWAC Quarantine Server URL. If the Redirect is enabled and the Redirect Destination is the Quarantine Server, when an unauthenticated host sends the HTTP request packets to a random Web server, the Switch will handle this HTTP packet and send back a message to the host to allow it access to the Quarantine Server with the configured URL. When a computer is connected to the specified URL, the quarantine server will request the computer user to input the user name and password to complete the authentication process. Update Server Settings Update Server IP This parameter specifies the Update Server IP address. Mask This parameter specifies the Server IP net mask. Port (1-65535) The accessible TCP/UDP port number for the specified update server network. Click Apply to implement changes made. JWAC Port Settings To view JWAC port settings for the Switch, click Security > Japanese Web-based Access Control (JWAC) > JWAC Port Settings, as shown below: Figure 7- 79. JWAC Port Table Parameter window 410