D-Link DGS-3627G Product Manual - Page 363
Port Security Entries, Max. Addr. 0-64, Port Security Entries Table window, Parameter
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Max. Addr. (0-64) The number of MAC addresses that will be in the MAC address-forwarding table for the selected switch and group of ports. Mode This pull-down menu allows you to select how the MAC address table locking will be implemented on the Switch, for the selected group of ports. The options are: Permanent - The locked addresses will not age out. DeleteOnTimeout - The locked addresses will age out after the aging timer expires. DeleteOnReset - The locked addresses will not age out until the Switch has been reset. Click Apply to implement changes made. Port Security Entries This window is used to remove an entry from the port security entries learned by the Switch and entered into the forwarding database. To view the following window, click Security > Port Security > Port Security Entries, as shown below: Figure 7- 4. Port Security Entries Table window This function is only operable if the Mode in the Port Security window is selected as Permanent or DeleteOnReset, or in other words, only addresses that are permanently learned by the Switch can be deleted on reset. Once the entry has been defined by entering the correct information into the window above, click the under the Delete heading of the corresponding MAC address to be deleted. Only entries marked Secured_Permanent can be deleted. Click the Next button to view the next page of entries listed in this table. This window displays the following information: Parameter Description VID The VLAN ID of the entry in the forwarding database table that has been permanently learned by the Switch. VLAN Name The VLAN Name of the entry in the forwarding database table that has been permanently learned by the Switch. MAC Address The MAC address of the entry in the forwarding database table that has been permanently learned by the Switch. Unit Enter the unit to configure. Port The ID number of the port that has permanently learned the MAC address. Type The type of MAC address in the forwarding database table. Only entries marked Secured_Permanent and Del_On_Reset can be deleted. Delete Click the in this field to delete the corresponding MAC address that was either deleted on reset or permanently learned by the Switch. 347