D-Link DGS-3627G Product Manual - Page 77
RSPAN Source Settings Edit window, Modify, Apply
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch To modify an existing entry of its source settings, click the corresponding Modify button in Modify Source, revealing the following window to configure: Figure 2- 65. RSPAN Source Settings (Edit) window The following fields can be configured: Parameter Description VLAN Name VID (1-4094) Mirror Group ID (1-4) Target Port Source Ports Action Rx Source Ports Tx Source Ports This is the VLAN Name that, along with the VLAN ID, identifies the VLAN which will modify the RSPAN entries. This is the VLAN ID that, along with the VLAN Name, identifies the VLAN which will to modify the RSPAN entries. Tick the check box and enter a group ID which mirror session is used for RSPAN source function. The mirror group Target Port which the mirror session used for the RSPAN source function. Use the pull-down menu to display the source port only. The goal of Rx source ports is to monitor as much as possible all the packets received by the source interface or VLAN before any modification or processing is performed by the switch. A copy of each packet received by the source is sent to the destination port for that RSPAN session. The goal of Tx source ports is to monitor as much as possible all the packets sent by the source interface after all modification and processing is performed by the switch. Click Apply to implement the changes. 61