D-Link DGS-3627G Product Manual - Page 328
Apply, ACL >, Access Profile Table, Modify, Access Rule
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 328 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch 0x0-0xffff) which you wish to filter. Select UDP to use the IPv6 UDP port number contained in an incoming packet as the forwarding criterion. Selecting IPv6 UDP requires that you specify a source port mask and/or a destination port mask. src port mask - Specify a IPv6 UDP port mask for the source port in hex form (hex 0x00xffff). dst port mask - Specify a IPv6 UDP port mask for the destination port in hex form (hex 0x00xffff) Click Apply to implement changes made. To view the configurations set for a previously created access profile, return to the Access Profile Table and click the button under the Display heading, corresponding to the access profile for which to view configurations. A window similar to the one below will be displayed. Figure 6- 7. Access Profile Entry Display window (Ethernet) To establish the rule for a previously created Access Profile: To view this window, click ACL > Access Profile Table, as shown below: Figure 6- 8. Access Profile Table window To create a new rule set for an access profile click the Modify button located under the Access Rule heading. The window shown below (Access Profile Rule) will be displayed. To remove a previously created rule, click the corresponding button. 312