D-Link DGS-3627G Product Manual - Page 97
Apply, SIM Settings, Single IP Management, Settings, Topology, Firmware Upgrade, Configuration
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Change the SIM State to Enabled using the pull-down menu and click Apply. The window will then refresh and the SIM Settings window will look like this: Figure 2- 90. SIM Settings window (Enabled) If the Switch Administrator wishes to configure the Switch as a Commander Switch (CS), select commander from the Role State field and click Apply. The following parameters can be set: Parameters Description SIM State Use the pull-down menu to either enable or disable the SIM state on the Switch. Disabled will render all SIM functions on the Switch inoperable. Role State Use the pull-down menu to change the SIM role of the Switch. The two choices are: Candidate - A Candidate Switch (CaS) is not the member of a SIM group but is connected to a Commander Switch. This is the default setting for the SIM role. Commander - Choosing this parameter will make the Switch a Commander Switch (CS). The user may join other switches to this Switch, over Ethernet, to be part of its SIM group. Choosing this option will also enable the Switch to be configured for SIM. Group Name Enter a group name in this field. Discovery Interval The user may set the discovery protocol interval, in seconds that the Switch will send out discovery packets. Returning information to a Commander Switch will include information about other switches connected to it. (Ex. MS, CaS). The user may set the Discovery Interval from 30 to 90 seconds. Holdtime This parameter may be set for the time, in seconds the Switch will hold information sent to it from other switches, utilizing the Discovery Interval. The user may set the hold time from 100 to 255 seconds. Click Apply to implement the settings changed. After enabling the Switch to be a Commander Switch (CS), the Single IP Management Settings folder will then contain four added links to aid the user in configuring SIM through the web, including Topology, Firmware Upgrade, Configuration Backup/Restore and Upload Log. 81