Home » D-Link Manuals » Hubs & Switches » D-Link DGS-3627G » Manual Viewer

D-Link DGS-3627G Product Manual - Page 17

Web-based Switch Configuration, Introduction - default password

UPC - 790069293764

Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Section 1 Web-based Switch Configuration Introduction Login to Web manager Web-Based User Interface Web Pages Introduction All software functions of the Switch can be managed, configured and monitored via the embedded web-based (HTML) interface. The Switch can be managed from remote stations anywhere on the network through a standard browser such as Firefox or Microsoft Internet Explorer. The browser acts as a universal access tool and can communicate directly with the Switch using the HTTP protocol. The Web-based management module and the Console program (and Telnet) are different ways to access the same internal switching software and configure it. Thus, all settings encountered in web-based management are the same as those found in the console program. Login to Web Manager To begin managing the Switch, simply run the browser you have installed on your computer and point it to the IP address you have defined for the device. The URL in the address bar should read something like: http://123.123.123.123, where the numbers 123 represent the IP address of the Switch. NOTE: The Factory default IP address for the Switch is 10.90.90.90. This opens the management module's user authentication window, as seen below. Figure 1- 1. Enter Network Password window Leave both the User Name field and the Password field blank and click OK. This will open the Web-based user interface. The Switch management features available in the web-based manager are explained below. 1

Section	Page
Web-based Switch Configuration	1
Administration	1
L2 Features	1
L3 Features	1
QoS	1
ACL	1
Security	1
Monitoring	1
Switch Maintenance	1
Technical Specifications	1
Cables and Connectors	1
System Log Entries	1
Module Specs and Cable Lengths	1
Password Recovery Procedure	1
RADIUS Attributes Assignment	1
Glossary	1

Match case Limit results 1 per page

xStack

DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch

Section 1

Web-based Switch Configuration

Introduction

Web-Based User Interface

Web Pages

Introduction

All software functions of the Switch can be managed, configured and monitored via the embedded web-based (HTML) interface.

The Switch can be managed from remote stations anywhere on the network through a standard browser such as Firefox or

Microsoft Internet Explorer. The browser acts as a universal access tool and can communicate directly with the Switch using the

HTTP protocol.

The Web-based management module and the Console program (and Telnet) are different ways to access the same internal

switching software and configure it. Thus, all settings encountered in web-based management are the same as those found in the

console program.

To begin managing the Switch, simply run the browser you have installed on your computer and point it to the IP address you

have defined for the device. The URL in the address bar should read something like: http://123.123.123.123, where the numbers

123 represent the IP address of the Switch.

NOTE:

The Factory default IP address for the Switch is 10.90.90.90.

This opens the management module's user authentication window, as seen below.

Figure 1- 1. Enter Network Password window

Leave both the User Name field and the Password

field blank and click

. This will open the Web-based user interface. The

Switch management features available in the web-based manager are explained below.