D-Link DGS-3627G Product Manual - Page 405

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch RADIUS Accounting Settings The Accounting feature of the Switch uses a remote RADIUS server to collect information regarding events occurring on the Switch. The following is a list of information that will be sent to the RADIUS server when an event triggers the Switch to send these informational packets. Account Session ID • Account Status Type • Account Terminate Cause • Account Authentic • Account Delay Time • Account Session Time • Username • Service Type • NAS IP Address • NAS Identifier • Calling Station ID There are three types of Accounting that can be enabled on the Switch. Network - When enabled, the Switch will send informational packets to a remote RADIUS server when 802.1X users connect to the physical ports on the switch to access the network. Network accounting only works when 802.1X is enabled Shell - When enabled, the Switch will send informational packets to a remote RADIUS server when a user either logs in, logs out or times out on the Switch, using the console, Telnet, or SSH. System - When enabled, the Switch will send informational packets to a remote RADIUS server when system events occur on the Switch, such as a system reset or system boot. Remember, this feature will not work properly unless a RADIUS Server has first been configured. This RADIUS server will format, store and manage the information collected here. To view this window, click Security > Access Authentication Control > RADIUS Accounting Settings, as shown below: Figure 7- 58. RADIUS Accounting Settings window 389