D-Link DGS-3627G Product Manual - Page 52
TFTP Services, TFTP Services window, Parameter, Description, Operation, Start - firmware
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch TFTP Services Trivial File Transfer Protocol (TFTP) services allow the Switch's firmware to be upgraded by transferring a new firmware file from a TFTP server to the Switch. A configuration file can also be loaded into the Switch from a TFTP server. Switch settings can be saved to the TFTP server, and a history log can be uploaded from the Switch to the TFTP server. The TFTP server must be running TFTP server software to perform the file transfer. The user also has the option of transferring firmware and configuration files to and from the internal Flash drive, located on the Switch. Using this window, the user can receive a configuration or firmware file from a TFTP server, or transfer that firmware or configuration file to a TFTP server. More about configuring the internal Flash drive can be found in the next section entitled Flash File Services. TFTP server software is a part of many network management software packages - such as NetSight, or can be obtained as a separate program. To update the Switch's firmware or configuration file, click Administration > TFTP Services, as shown below: Figure 2- 33. TFTP Services window The following parameters can be configured: Parameter Description Operation Select a service for the TFTP server to perform from the drop down window: Download Firmware - Enter the IP address of the TFTP server and specify the location of the new firmware on the TFTP server. Click Start to record the IP address of the TFTP server and to initiate the file transfer. Download Configuration - Enter the IP address of the TFTP server, and the path and filename for the Configuration file on the TFTP server. Click Start to record the IP address of the TFTP server and to initiate the file transfer. Upload Configuration - Enter the IP address of the TFTP server and the path and filename for the switch settings on the TFTP server. Click Start to record the IP address of the TFTP server and to initiate the file transfer. Upload Log - Enter the IP address of the TFTP server and the path and filename for the history log on the TFTP server. Click Start to record the IP address of the TFTP server and to initiate the file transfer. Upload Attack Log - Enter the IP address of the TFTP server and the path and filename for the attack log on the TFTP server. Click Start to record the IP address of the TFTP server and to initiate the file transfer. Upload Firmware - Enter the IP address of the TFTP server and the path and filename for the place to put this firmware on the TFTP server. Click Start to record the IP address of the TFTP server and to initiate the file transfer. 36