D-Link DGS-3627G Product Manual - Page 87

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 2- 78. SNMP Host Table Configuration window for IPv6 The following parameters can set: Parameter Description Host IPv6 Address Type the IPv6 address of the remote management station that will serve as the SNMP host for the Switch. SNMP Version V1 - To specifies that SNMP version 1 will be used. V2 - To specify that SNMP version 2 will be used. V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level. V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Community String or Type in the community string or SNMP V3 user name as appropriate. SNMP V3 User Name To implement your new settings, click Apply. To return to the SNMP Host Table window, click the Show All SNMP Host Table Entries link. SNMP Engine ID The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the SNMP engine on the Switch. To display the Switch's SNMP Engine ID, click Administration > SNMP Manager > SNMP Engine ID, as shown. Figure 2- 79. SNMP Engine ID window To change the Engine ID, enter the new Engine ID in the space provided and click the Apply button. 71