D-Link DGS-3627G Product Manual - Page 298

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch BGP Neighbor Map & Filter Settings This window is used to configure BGP neighbor map and filter settings. To view this window, click L3 Features > BGP > BGP Neighbor Map & FilterSettings, as shown below: Figure 4- 140. BGP Neighbor Map & Filter Settings window To configure BGP neighbor map & filter settings on the Switch, complete the following fields: Parameter Description BGP Neighbor Map Settings IP Address Enter the IP address of the neighbor to be configured. Peer Group Name Enter the peer group to be configured. Unsuppress Map Action Toggle between Add and Delete. Unsuppress Map Name Enter the name of a route map used to selectively advertise routes previously suppressed by the aggregate address command. Route Map Type Toggle between In and Out. In specifies the incoming routes from the neighbor and Out specifies the outgoing routes sent to the peer. Route Map Action Toggle between Add and Delete. Route Map Name Enter the route map to be applied to the incoming or outgoing routes. BGP Neighbor Filter Settings 282