D-Link DGS-3627G Product Manual - Page 80
SNMP User Table, Administration, SNMP Manager > SNMP User Table, SNMP User, Table Display
UPC - 790069293764
View all D-Link DGS-3627G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch SNMP User Table This window displays all of the SNMP users currently configured on the Switch. To view this window, click Administration > SNMP Manager > SNMP User Table, as shown below: Figure 2- 67. SNMP User Table window To delete an existing SNMP User Table entry, click the below the Delete heading corresponding to the entry you wish to delete. To display the detailed entry for a given user, click the View button under the Display heading. This will open the SNMP User Table Display window, as shown below: Figure 2- 68. SNMP User Table Display window The following parameters are displayed: Parameter Description User Name An alphanumeric string of up to 32 characters. This is used to identify the SNMP users. Group Name This name is used to specify the SNMP group created can request SNMP messages. SNMP Version V3 - Indicates that SNMP version 3 is in use. Auth-Protocol None - Indicates that no authentication protocol is in use. MD5 - Indicates that the HMAC-MD5-96 authentication level will be used. SHA - Indicates that the HMAC-SHA authentication protocol will be used. Priv-Protocol None - Indicates that no privacy (encryption) protocol is in use. DES - Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56) standard. To return to the SNMP User Table, click the Show All SNMP User Table Entries link. To add a new entry to the SNMP User Table, click the Add button on the SNMP User Table window. This will open the SNMP User Table Configuration window, as shown below: 64