Dell PowerConnect J-SRX100 Hardware Guide - Page 104
Table 30: Services Gateway LED Status on Startup, Table 31: Component LEDs on the Services Gateway
View all Dell PowerConnect J-SRX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
PowerConnect J-SRX100 Services Gateway Hardware Guide Table 30: Services Gateway LED Status on Startup (continued) LED State Description Power LED Green Indicates that the device is receiving normal power supply. HA LED Off Indicates that the device is not part of chassis clustering set up. The LEDs available on the services gateway display the status of various components. Table 31 on page 90 describes the LEDs. Table 31: Component LEDs on the Services Gateway LED State Meaning Possible Causes and Corrective Actions Status LED Green Indicates that the device is functioning normally. Normal condition. No action is required. Amber Red • Indicates that the device is starting up. • Indicates that the Reset Config button is pressed. Normal condition. No action is required. Indicates that an error is detected in the device. Contact Dell Support. See "Dell Support" on page 95. Alarm LED Red Indicates a major alarm. Major alarm indicates a critical situation on the services gateway that requires immediate action. See "Monitoring the J-SRX100 Services Gateway Using Chassis Alarm Conditions" on page 91. Amber Indicates a minor alarm. Minor alarm condition requires monitoring or maintenance. If left unchecked, it might cause an interruption in service or degradation in performance. See "Monitoring the J-SRX100 Services Gateway Using Chassis Alarm Conditions" on page 91. Off Indicates that there are Normal condition. No action currently no alarms. is required. 90