Dell PowerConnect J-SRX100 Hardware Guide - Page 52
Preparing the J-SRX100 Services Gateway for Desk-Mount Installation
View all Dell PowerConnect J-SRX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
PowerConnect J-SRX100 Services Gateway Hardware Guide NOTE: The rack-mounting kit is not shipped with the device and must be ordered separately. Preparing the J-SRX100 Services Gateway for Desk-Mount Installation You can mount a J-SRX100 Services Gateway on a desk or other level surface horizontally or vertically. The four rubber feet attached to the chassis provide stability. Before mounting a J-SRX100 Services Gateway on a desk or other level surface: • Verify that the site meets the requirements described in "Site Preparation Checklist for the J-SRX100 Services Gateway" on page 19. • Place the desk in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure. • Remove the services gateway chassis from the shipping carton. For unpacking instructions, see "Unpacking the J-SRX100 Services Gateway" on page 33. • If you are mounting the device vertically on the desk, make sure that the following parts are available in your vertical desk-mounting kit for the J-SRX100 Services Gateway: • Vertical stand • Screws NOTE: The vertical desk-mounting kit is not shipped with the device and must be ordered separately. Related • Site Preparation Checklist for the J-SRX100 Services Gateway on page 19 Documentation • Unpacking the J-SRX100 Services Gateway on page 33 • Clearance Requirements for Airflow and Hardware Maintenance of the J-SRX100 Services Gateway on page 24 • Preparing the J-SRX100 Services Gateway for Rack-Mount Installation on page 37 • Preparing the J-SRX100 Services Gateway for Wall-Mount Installation on page 38 Preparing the J-SRX100 Services Gateway for Wall-Mount Installation You can mount a J-SRX100 Services Gateway on a wall. The four rubber feet attached to the chassis provide stability. Before mounting a J-SRX100 Services Gateway on a wall: • Verify that the site meets the requirements described in "Site Preparation Checklist for the J-SRX100 Services Gateway" on page 19. 38