Dell PowerConnect J-SRX100 Hardware Guide - Page 77
Connecting the J-SRX100 Services Gateway to Management Devices, Connecting a J-SRX100
View all Dell PowerConnect J-SRX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
CHAPTER 12 Connecting the J-SRX100 Services Gateway to Management Devices This chapter includes the following sections: • Connecting a J-SRX100 Services Gateway to the J-Web Interface on page 63 • Connecting the J-SRX100 Services Gateway to the CLI on page 65 • Connecting the Modem at the J-SRX100 Services Gateway End on page 67 • Connecting the Modem to the Console Port on the J-SRX100 Services Gateway on page 68 • Connecting to the CLI at the User End for the J-SRX100 Services Gateway on page 69 Connecting a J-SRX100 Services Gateway to the J-Web Interface If you plan to use the J-Web interface to configure the J-SRX100 Services Gateway, you must connect through one of the built-in Ethernet management ports. To connect to the J-Web interface through any of the ports fe-0/0/1 to fe-0/0/7 on the services gateway, see Figure 17 on page 64. 63