Dell PowerConnect J-SRX100 Hardware Guide - Page 59
Installing the J-SRX100 Services Gateway in a Rack
View all Dell PowerConnect J-SRX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 8: Installing the J-SRX100 Services Gateway a. Position the device or devices in the rack-mount tray as shown in Figure 10 on page 45. Although the figure shows two devices, you can also use the following procedure to install one device. Figure 10: Installing the J-SRX100 Services Gateway in a Rack J-SRX100 J-SRX100 b. Use a number-1 Phillips screwdriver to install the screws that secure the device to the rack-mount tray. c. Have one person grasp the sides of the rack-mount tray, lift it, and position it in the rack. d. Align the bottom hole in each side of the rack-mount tray with a hole in each rack rail as shown in Figure 11 on page 45, making sure the rack-mount tray is level. Figure 11: Hanging the J-SRX100 Services Gateway in a Non-Telco Rack e. Have a second person install the 10-32 screws with washers into each of the two aligned holes on the rack. Use a number-2 Phillips screwdriver to install the mounting screws. 45