HP 3500 HP Color LaserJet 3500 Series Printer - Software Technical Reference, - Page 39
<fs> Dimm In, Use Tray X - color cartridges
View all HP 3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Control panel message Rotating motor alternates with To exit press STOP key Rotating motor alternates with To exit press STOP key Setting saved Tray X alternates with To change size or type press the Select button on the printer front panel. UNAUTHORIZED SUPPLY IN USE alternates with Ready UNSUPPORTED DATA ON DIMM IN SLOT X alternates with To clear press the Select button on the printer front panel. USE TRAY X Wait for printer to reinitialize 10.92.YYSUPPLY MEMORY ERROR For help press ? Description A component test is in progress; the component selected is Cartridge motor. The printer is executing a Component Test and the component selected is Rotating . A menu selection has been saved. The printer is reporting the current configuration of Tray X. The printer has detected that a non-HP supply is currently installed and the Select button on the printer front panel (override) was pressed. The data on the DIMM is not supported (although the DIMM itself may be supported). The printer is offering a selection of alternate paper to use for the print job. Settings have been changed before the printer automatically restarts, or external device modes have changed. The printer cannot read or write to at least one print cartridge memory tag, or at least one memory tag is missing. Recommended action Press STOP when ready to stop this test. Press STOP when ready to stop this test. No action necessary. No action necessary. See Configuring trays for more details. If you believe you purchased an HP supply, please call the HP fraud hotline at 1-877-219-3183. Service or repairs required as a result of using non-HP supplies are not covered under HP warranty. Press the Select button on the printer front panel.to clear this message. or Press SELECT to continue printing. 1. If desired, use the up and down arrow buttons on the printer front panel to highlight a different size or type, and then press the Select button on the printer front panel to select the size or type. 2. Press the Back arrow button on the printer control panel to return to the previous size or type. See Configuring trays for more information. No action necessary. 1. Open and close the front door. 2. If the error persists, contact HP Support. Software Technical Reference ENWW Technology background information 37