HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 124

Switch Memory and Configuration Using Primary and Secondary Flash Image Options switch from the opposite flash image and using show version again, you can determine the version(s) of switch software in both flash sources. For example: 1. In this example show version indicates the switch has version Z.14.04 in primary flash. 2. After the boot system command, show version indicates that version Z.14.04 is in secondary flash. ProCurve(config)# show version Image stamp: Boot Image: /sw/code/build/vern(t4br) Jul 27 2009 13:42:40 Z.14.04 1037 Primary ProCurve(config)# boot system flash secondary Device will be rebooted, do you want to continue [y/n]? y ProCurve(config)# show version Image stamp: Boot Image: /sw/code/build/vern(t4br) Jul 27 2009 13:42:40 Z.14.04 1037 Secondary Figure 6-9. Determining the Software Version in Primary and Secondary Flash Switch Software Downloads The following table shows the switch's options for downloading a software version to flash and booting the switch from flash Table 6-1. Primary/Secondary Memory Access Action Menu Download to Primary Yes Download to Secondary No Boot from Primary Yes Boot from Secondary No CLI Yes Yes Yes Yes Web Browser Yes Yesa Yes No SNMP Yes Yes Yes Yes a.This download simply reloads the image. The different software download options involve different copy commands, plus xmodem, usb, and tftp. These topics are covered in Appendix A, "File Transfers". 6-16