HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 229
Viewing Transceiver Status, show interfaces, show tech transceivers,
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Port Status and Configuration Viewing Port Status and Configuring Port Parameters Operating Notes: ■ For each port on the switch, the command provides a real-time display of the rate at which data is received (Rx) and transmitted (Tx) in terms of kilobits per second (KBits/s), number of packets per second (Pkts/ s), and utilization (Util) expressed as a percentage of the total bandwidth available. ■ The show interfaces command can be used to display the current link status and the port rate average over a 5 minute period. Port rates are shown in bits per second (bps) for ports up to 1 Gigabit; for 10 Gigabit ports, port rates are shown in kilobits per second (Kbps). Viewing Transceiver Status The show tech transceivers command allows you to: ■ Remotely identify transceiver type and revision number without having to physically remove an installed transceiver from its slot. ■ Display real-time status information about all installed transceivers, including non-operational transceivers. Figure 10-8 shows sample output from the show tech transceivers command. ProCurve# show tech transceivers Transceiver Technical Information: Port # | Type | Prod # | Serial # | Part # 21 | 1000SX | J4858B | CN605MP23K | 22 | 1000LX | J4859C | H117E7X | 2157-2345 23 | ?? | ?? | unsupported | 25 | 10GbE-CX4 | J8440A | US509RU079 | 26 | 10GbE-CX4 | J8440A | US540RU002 | 27 | 10GbE-LR | J8437B | PPA02-2904:0017 | 2157-2345 28 | 10GbE-SR | J8436B | 01591602 | 2158-1000 29 | 10GbE-ER | J8438A | PPA03-2905:0001 | The following transceivers may not function correctly: Port # Message -------- Port 23 Self test failure. Figure 10-8. Example of Show Tech Transceivers Command 10-14