HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 462

Troubleshooting Browser or Telnet Access Problems Cannot Telnet into the switch console from a station on the network: ■ Telnet access may be disabled by the Inbound Telnet Enabled parameter in the System Information screen of the menu interface: 2. Switch Configuration 1. System Information ■ The switch may not have the correct IP address, subnet mask, or gateway. Verify by connecting a console to the switch's Console port and selecting: 2. Switch Configuration 5. IP Configuration Note: If DHCP/Bootp is used to configure the switch, refer to the Note, above. ■ If you are using DHCP to acquire the IP address for the switch, the IP address "lease time" may have expired so that the IP address has changed. For more information on how to "reserve" an IP address, refer to the documentation for the DHCP application that you are using. ■ If one or more IP-Authorized managers are configured, the switch allows inbound telnet access only to a device having an authorized IP address. For more information on IP Authorized managers, refer to the Access Security Guide for your switch. C-8