HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 195
Use the Space bar to select the, Do one of the following
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Time Protocols SNTP: Viewing, Selecting, and Configuring CONSOLE - MANAGER MODE Switch Configuration - System Information System Name : ProCurve System Contact : System Location : Inactivity Timeout (min) [0] : 0 Inbound Telnet Enabled [Yes] : Yes Time Sync Method [None] : TIMEP TimeP Mode [Disabled] : Disabled Tftp-enable [Yes] : Yes Time Zone [0] : 0 Daylight Time Rule [None] : None Actions-> Cancel Edit Save MAC Age Time (sec) [300] : 300 Web Agent Enabled [Yes] : Yes Server Address : Jumbo Max Frame Size [9216] : 9216 Jumbo IP MTU [9198] : 9198 Help Time Protocol Selection Parameter - TIMEP - SNTP - None Figure 9-1. The System Information Screen (Default Values) 2. Press [E] (for Edit). The cursor moves to the System Name field. 3. Use [v] to move the cursor to the Time Sync Method field. 4. Use the Space bar to select SNTP, then press [v] once to display and move to the SNTP Mode field. 5. Do one of the following: • Use the Space bar to select the Broadcast mode, then press [v] to move the cursor to the Poll Interval field, and go to step 6. (For Broadcast mode details, refer to "SNTP Operating Modes" on page 9-2.) Time Sync Method [None] : SNTP SNTP Mode [Disabled] : Broadcast Poll Interval (sec) [720] : 720 Tftp-enable [Yes] : Yes Time Zone [0] : 0 Daylight Time Rule [None] : None Figure 9-2. Time Configuration Fields for SNTP with Broadcast Mode • Use the Space bar to select the Unicast mode, then do the following: i. Press [>] to move the cursor to the Server Address field. ii. Enter the IP address of the SNTP server you want the switch to use for time synchronization. 9-6