HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 148
Xmodem: Copying a Configuration File to a Serially, Connected Host, Syntax, config
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Switch Memory and Configuration Multiple Configuration Files Xmodem: Copying a Configuration File to a Serially Connected Host Syntax: copy config < filename > xmodem < pc | unix > [oobm] This is an addition to the copy < config > xmodem command options. Use this command to upload a configuration file from the switch to an Xmodem host. The oobm parameter specifies that the copy operation will go out from the out-of-band management interface. If this parameter is not specified, the copy operation goes out from the data interface. Refer to Appendix G, "Network Out-ofBand Management" in this guide for more information on out-of-band management. For more on using Xmodem to copy a file to a serially connected host, refer to "Xmodem: Copying a Configuration File to a USB Serial Console Connected PC or UNIX Workstation" on page A-28. Xmodem: Copying a Configuration from a Serially Connected Host Syntax: copy xmodem config < dest-file > < pc | unix > [oobm] This is an addition to the copy xmodem command options. Use this command to download a configuration file from an Xmodem host to the switch. The oobm parameter specifies that the copy operation will go out from the out-of-band management interface. If this parameter is not specified, the copy operation goes out from the data interface. Refer to Appendix G, "Network Out-ofBand Management" in this guide for more information on out-of-band management. For more on using Xmodem to copy a file from a serially connected host, refer to "Xmodem: Copying a Configuration File from a Serially Connected PC or UNIX Workstation" on page A-29. 6-40