HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 305

Configuring for Network Management Applications Using SNMP Tools To Manage the Switch Syntax: [no] snmpv3 community This command maps or removes a mapping of a community name to a group access level. To remove a mapping you, only need to specify the index_name parameter. index This is an index number or title for the mapping. The values of 1-5 are reserved and can not be mapped. name This is the community name that is being mapped to a group access level. sec-name This is the group level to which the community is being mapped. For more information refer to "Group Access Levels" on page 13-12. tag This is used to specify which target address may have access by way of this index reference. Figure 13-4 shows the assigning of the Operator community on MgrStation1 to the CommunityOperatorReadWrite group. Any other Operator only has an access level of CommunityOperatorReadOnly Add mapping to allow write access for Operator community on MgrStation1 Two Operator Access Levels Figure 13-4. Assigning a Community to a Group Access Level 13-13