HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 222
Using the Menu To Con Ports., From the Main Menu, Select
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
Note Port Status and Configuration Viewing Port Status and Configuring Port Parameters Using the Menu To Configure Ports. You can configure and view the port settings by using the menu. The menu interface uses the same screen for configuring both individual ports and port trunk groups. For information on port trunk groups, refer to Chapter 11, "Port Trunking" . 1. From the Main Menu, Select: 2. Switch Configuration... 2. Port/Trunk Settings An example of the Menu display is shown below. TELNET - MANAGER MODE Switch Configuration - Port/Trunk Settings Port ---A1 A2 A3 A4 A5 A6 A7 A8 Type Enabled 1000T | Yes 1000T | Yes 1000T | Yes 1000T | Yes 1000T | Yes 1000T | Yes 1000T | Yes 1000T | Yes Mode -----------Auto-10-100 Auto-10-100 Auto Auto Auto Auto Auto Auto Flow Ctrl --------Disable Disable Disable Disable Disable Disable Disable Disable Group ----- Trk1 Trk2 Type ----- Trunk Trunk Actions-> Cancel Edit Save Help Cancel changes and return to previous screen. Use arrow keys to change action selection and to execute action. Figure 10-2. Example of Port/Trunk Settings with a Trunk Group Configured 2. Press [E] (for Edit). The cursor moves to the Enabled field for the first port. 3. Refer to the online help provided with this screen for further information on configuration options for these features. 4. When you have finished making changes to the above parameters, press [Enter], then press [S] (for Save). 10-7