HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 402
Xmodem: Copying a Configuration File to a USB Serial, Console Connected PC or UNIX Workstation
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
File Transfers Transferring Switch Configurations Syntax: show tech custom Executes the commands found in a custom file instead of the hard-coded list. Note: Exit the global config mode (if needed) before executing show tech commands. You can include show tech commands in the custom file, with the exception of show tech custom. For example, you can include the command show tech all. If no custom file is found, a message displays stating "No SHOW-TECH file found." ProCurve# show tech custom No SHOW-TECH file found. No custom file was uploaded with the copy tftp showtech command Figure A-10. Example of the show tech custom Command Xmodem: Copying a Configuration File to a USB Serial Console Connected PC or UNIX Workstation To use this method, the switch must be connected via the USB serial console to a PC or UNIX workstation. You will need to: ■ Determine a filename to use. ■ Know the directory path you will use to store the configuration file. Syntax: copy < startup-config | running-config > xmodem < pc | unix > copy config < filename > xmodem < pc | unix > Uses Xmodem to copy a designated configuration file from the switch to a PC or Unix workstation. For more on multiple configuration files, refer to "Multiple Configuration Files" on page 6-25. For example, to copy a configuration file to a PC serially connected to the switch: 1. Determine the file name and directory location on the PC. A-28