HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 362

Configuring for Network Management Applications LLDP (Link-Layer Discovery Protocol) ProCurve# show lldp info local-device LLDP Local Device Information Chassis Type : mac-address Chassis Id : 00 24 81 b0 09 21 System Name : ProCurve 6120 Blade Switch System Description : ProCurve 498358-B21 6120 Blade Switch, revision ... System Capabilities Supported:bridge System Capabilities Enabled:bridge Management Address : Type:ipv4 Address:16.93.40.251 The Management Address field displays only the LLDP-configurable IP addresses on the switch. (Only manually-configured IP LLDP Port Information addresses are LLDP-configurable.) If the switch has only an IP address from a DHCP or Port | PortType PortId PortDesc Bootp server, then the Management Address field is empty (because there are no LLDP- D1 | local 1 D1 D2 | local 2 D2 D3 | local 3 D3 D4 | local 4 D4 configurable IP addresses available). For more on this topic, refer to "Remote Management Address" on page 13-42. D5 | local 5 D5 D6 | local 6 D6 . . . . . . . . . . . . Figure 13-18. Example of Displaying the Global and Per-Port Information Available for Outbound Advertisements 13-70 Figure 13-19. Example of the Default Per-Port Information Content for Ports 1 and 2 Displaying the Current Port Speed and Duplex Configuration on a Switch Port. Port speed and duplex information for a switch port and a connected LLDP-MED endpoint can be compared for configuration mismatches by using an SNMP application. You can also use the switch CLI to display this information, if necessary. The following two commands provide methods for displaying speed and duplex information for switch ports. For information on displaying the currently configured port speed and duplex on