HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 539
Viewing the Current DNS Configuration
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 539 highlights
Troubleshooting DNS Resolver As mentioned under "Basic Operation" on page C-80, if the DNS entry configured in the switch does not include the domain suffix for the desired target, then you must use the target host's fully qualified domain name with DNScompatible commands. For example, using the document server in Figure C27 as a target: ProCurve# ping docservr.pubs.outdoors.com 10.28.229.219 is alive, time = 1 ms Target's Fully Qualified Domain Name ProCurve# traceroute docservr.pubs.outdoors.com traceroute to 10.28.229.219 1 hop min, 30 hops max, 5 sec. timeout, 3 probes 1 10.28.192.2 1 ms 0 ms 0 ms 2 10.28.229.219 0 ms 0 ms 0 ms Figure C-30. Example of Ping and Traceroute Execution When Only the DNS Server IP Address Is Configured Viewing the Current DNS Configuration The show ip command displays the current domain suffix and the IP address of the highest priority DNS server configured on the switch, along with other IP configuration information. If the switch configuration currently includes a non-default (non-null) DNS entry, it will also appear in the show run command output. ProCurve# show ip Internet (IP) Service IP Routing : Disabled Default Gateway : 10.28.192.2 Default TTL : 64 Arp Age : 20 Domain Suffix : pubs.outdoors.com DNS server : 10.28.229.10 DNS Resolver Configuration in the show ip command output VLAN | IP Config IP Address Subnet Mask DEFAULT_VLAN | Manual 10.28.192.1 255.255.255.0 Figure C-31. Example of Viewing the Current DNS Configuration C-85