HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 15
Host, USB Device, PC or UNIX Workstation, Copying Diagnostic Data to a Remote
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CLI: Xmodem Download from a PC or UNIX Workstation to Primary or Secondary Flash A-21 Switch-to-Switch Download A-22 Menu: Switch-to-Switch Download to Primary Flash A-22 CLI: Switch-To-Switch Downloads A-23 Using PCM+ to Update Switch Software A-24 Copying Software Images A-25 TFTP: Copying a Software Image to a Remote Host A-25 Xmodem: Copying a Software Image from the Switch to a USB Serial Console Connected PC or UNIX Workstation . . . . A-25 Transferring Switch Configurations A-26 TFTP: Copying a Configuration File to a Remote Host A-26 TFTP: Copying a Configuration File from a Remote Host . . . . A-27 TFTP: Copying a Customized Command File to a Switch . . . . A-27 Xmodem: Copying a Configuration File to a USB Serial Console Connected PC or UNIX Workstation A-28 Xmodem: Copying a Configuration File from a Serially Connected PC or UNIX Workstation A-29 Copying Diagnostic Data to a Remote Host, USB Device, PC or UNIX Workstation A-30 Copying Command Output to a Destination Device A-31 Copying Event Log Output to a Destination Device A-31 Copying Crash Data Content to a Destination Device A-32 Copying Crash Log Data Content to a Destination Device . . . . A-33 B Monitoring and Analyzing Switch Operation Contents B-1 Overview B-3 Status and Counters Data B-4 Menu Access To Status and Counters B-5 General System Information B-6 Menu Access B-6 CLI Access to System Information B-7 Task Monitor-Collecting Processor Data B-8 Switch Management Address Information B-8 xiv