HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 401
TFTP: Copying a Configuration File from a Remote Host, TFTP: Copying a Customized Command File to a Switch
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 401 highlights
File Transfers Transferring Switch Configurations TFTP: Copying a Configuration File from a Remote Host Syntax: copy tftp < startup-config | running-config > < ip-address > < remote-file > [ pc | unix ] copy tftp config < filename > < ip-address > < remote-file > [ pc | unix ] This command can copy a configuration from a remote host to a designated config file in the switch. For more on multiple configuration files, refer to "Multiple Configuration Files" on page 6-25. (Refer to "Using Primary and Secondary Flash Image Options" on page 6-14 for more on flash image use.) For example, to download a configuration file named sw8200 in the configs directory on drive "d" in a remote host having an IP address of 10.28.227.105: ProCurve# copy tftp startup-config 10.28.227.105 d:\configs\sw8200 TFTP: Copying a Customized Command File to a Switch Using the copy tftp command with the show-tech option provides the ability to copy a customized command file to the switch. When the show tech custom command is executed, the commands in the custom file are executed instead of the hard-coded list of commands. If no custom file is found, the current hard-coded list is executed. This list contains commands to display data such as the image stamp, running configuration, boot history, port settings, and so on. Syntax: copy tftp show-tech Copy a customized command file to the switch. ProCurve(config)# copy tftp show-tech 10.10.10.3 commandfile1 Figure A-9. Example of Using the copy tftp show-tech Command to Upload a Customized Command File A-27