HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 358
Configuring Coordinate-Based Locations., Atlantic, Pacific
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
Configuring for Network Management Applications LLDP (Link-Layer Discovery Protocol) Note: A switch port allows one instance of any given CATYPE. For example, if a type/value pair of 6 Atlantic (to specify "Atlantic" as a street name) is configured on port A5 and later another type/value pair of 6 Pacific is configured on the same port, then Pacific replaces Atlantic in the civic address location configured for port A5. elin-addr < emergency-number > This feature is intended for use in Emergency Call Service (ECS) applications to support class 3 LLDP-MED VoIP telephones connected to a switch covered in this guide in a multiline telephone system (MLTS) infrastructure. An ELIN (Emergency Location Identification Number) is a valid North American Numbering Plan (NANP) format telephone number assigned to MLTS operators in North America by the appropriate authority. The ELIN is used to route emergency (E911) calls to a Public Safety Answering Point (PSAP). (Range: 1-15 numeric characters) Configuring Coordinate-Based Locations. Latitude, longitude, and altitude data can be configured per switch port using an SNMP management application. For more information, refer to the documentation provided with the application. A further source of information on this topic is RFC 3825Dynamic Host Configuration Protocol Option for Coordinate-based Location Configuration Information. Note Endpoint use of data from a medPortLocation TLV sent by the switch is devicedependent. Refer to the documentation provided with the endpoint device. 13-66