HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 512

Troubleshooting Diagnostic Tools Web: Executing Ping or Link Tests 1. Click here. 2. Click here. 3. Select Ping Test (the default) or Link Test 4. For a Ping test, enter the IP address of the target device. For a Link test, enter the MAC address of the target device. C-58 6. Click on Start to begin the test. 5. Select the number of tries (packets) and the timeout for each try from the drop-down menus. Figure C-11. Link and Ping Test Screen on the Web Browser Interface Successes indicates the number of Ping or Link packets that successfully completed the most recent test. Failures indicates the number of Ping or Link packets that were unsuccessful in the last test. Failures indicate connectivity or network performance problems (such as overloaded links or devices). Destination IP/MAC Address is the network address of the target, or destination, device to which you want to test a connection with the switch. An IP address is in the X.X.X.X format where X is a decimal number between 0 and 255. A MAC address is made up of 12 hexadecimal digits, for example, 0060b0-080400.