HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 206
Menu: Viewing and Configuring TimeP, To View, Enable, and Modify the TimeP Protocol
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Time Protocols TimeP: Viewing, Selecting, and Configuring Menu: Viewing and Configuring TimeP To View, Enable, and Modify the TimeP Protocol: 1. From the Main Menu, select: 2. Switch Configuration... 1. System Information CONSOLE - MANAGER MODE Switch Configuration - System Information System Name : ProCurve System Contact : System Location : Inactivity Timeout (min) [0] : 0 Inbound Telnet Enabled [Yes] : Yes Time Sync Method [None] : TIMEP TimeP Mode [Disabled] : Disabled Tftp-enable [Yes] : Yes Time Zone [0] : 0 Daylight Time Rule [None] : None MAC Age Time (sec) [300] : 300 Web Agent Enabled [Yes] : Yes Time Protocol Selection Parameter - TIMEP (the default) - SNTP - None Actions-> Cancel Edit Save Help Figure 9-12. The System Information Screen (Default Values) Press [E] (for Edit). The cursor moves to the System Name field. 2. Use [v] to move the cursor to the Time Sync Method field. 3. If TIMEP is not already selected, use the Space bar to select TIMEP, then press [v] once to display and move to the TimeP Mode field. 4. Do one of the following: • Use the Space bar to select the DHCP mode, then press [v] to move the cursor to the Poll Interval field, and go to step 6. • Use the Space bar to select the Manual mode. i. Press [>] to move the cursor to the Server Address field. 9-17