HP 6120XG ProCurve Series 6120 Blade Switches Management and Configuration Gui - Page 158
Example of show telnet Command Displaying Resolved IP Addresses
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Interface Access and System Information Interface Access: Console/Serial Link, Web, and Inbound Telnet ProCurve(config)# show telnet Telnet Activity Session : ** 1 Privilege: Manager From : Console To : Session : ** 2 Privilege: Manager From : 12.13.14.10 To : 15.33.66.20 Session : ** 3 Privilege: Operator From : 2001:db7:5:0:203:4ff:fe0a:251 To : 2001:db7:5:0:203:4ff1:fddd:12 Figure 7-3. Example of show telnet Command Displaying Resolved IP Addresses Reconfigure Web Browser Access. In the default configuration, web browser access is enabled. Syntax: [no] web-management [listen ] Use the no version of the command to disable inbound HTTP access. The listen parameter is available only on switches that have a separate out-of-band management port. Values for this parameter are: • oobm - inbound HTTP access is enabled only on the out-of-band management port. • data - inbound HTTP access is enabled only on the data ports. • both - inbound HTTP access is enabled on both the out-of-band management port and on the data ports. This is the default value. Refer to Appendix G, "Network Out-of-Band Management" in this guide for more information on out-of-band management. The listen parameter is not available on switches that do not have a separate out-of-band management port. 7-7